Latest HP HPE6-A66 Exam questions and answers
GuideTorrent HPE6-A66 Exam Practice Test Questions (Updated 60 Questions)
HP HPE6-A66 exam is designed for IT professionals who are interested in validating their skills and knowledge in designing Aruba wireless networks. Aruba Certified Design Associate Exam certification validates your ability to design a wireless network that meets the requirements of your organization. HPE6-A66 exam is also ideal for those who want to enhance their skills in the field of wireless networking and want to learn how to design efficient and secure wireless networks.
To take the exam, candidates must have a basic understanding of networking concepts and protocols, as well as experience working with Aruba wireless networks. HPE6-A66 exam is designed for individuals who are responsible for designing and implementing wireless networks, including network engineers, system administrators, and network architects. HPE6-A66 exam consists of 60 multiple-choice questions, and candidates have 90 minutes to complete the exam. A passing score of 70% or higher is required to earn the certification. The HP HPE6-A66 certification is valid for three years, after which candidates must pass a recertification exam to maintain their certification.
NEW QUESTION # 26
A company has hired a network architect to replace an existing legacy wireless and wired network The building is one-story and contains four wiring closets Based on the information the network architect gathered from the company, one 48-port POE+ switch and three 48-port non-POE+ switches will be placed in each wiring closet. One stacking domain should be created for each wiring closet that supports 40 Gbps uplinks.
Which stacking solution should the architect implement for the floor that meets the requirements and is the most cost-effective'?
- A. Backplane stacking
- B. VSF
- C. Distributed trunking
- D. VSX
Answer: D
NEW QUESTION # 27
Which must you perform in IRIS to assign a device to a Design Group?
- A. Right-click the device and select Set Layer Membership
- B. Right-click the device and select Set Design Group
- C. Drag and drop the device into the Design Group
- D. Drag and drop the device into the Site
Answer: C
NEW QUESTION # 28
A network architect has created two sites in IRIS and defined network devices for each site. From which window would a network architect connect the two sites together?
- A. Start Page
- B. Topology
- C. Catalog
- D. Site-1
Answer: D
NEW QUESTION # 29
Which component uniquely defines the BSSID when implementing an employee SSID?
- A. Wireless device MAC address
- B. Radio MAC address
- C. Case-sensitive SSID name
- D. Case-insensitive SSID name
Answer: A
NEW QUESTION # 30
A company is installing Internet of Things (loT) devices to support a smart and energy-efficient environment for a building, including loT devices for heating and air conditioning, lights, and window shades. loT devices of these types are typically classified as which category of devices?
- A. Highly mobile devices (HMD)
- B. Nomadic devices
- C. Stationary devices
- D. Somewhat mobile devices (SMD)
Answer: B
NEW QUESTION # 31
What is the main key for a network design to ensure users have a good experience running their applications'?
- A. Determine the number of users per location.
- B. Provide appropriate AP density.
- C. Implement appropriate security controls
- D. Provision adequate bandwidth.
Answer: B
NEW QUESTION # 32
A company has a warehouse that requires ruggedized APs to provide wireless access The APs need to support these characteristics:
* 2 or more spatial streams
* 802.11 ac and 802.11 n support
Cat 7 Ethernet cabling will be used to connect the APs to POE+ capable switches Link aggregation should be employed between the APs and the Ethernet switches. Which would be the most cost-effective solution that would meet the company's requirements?
- A. AP 510 with external omnidirectional antennas and plastic AP cover
- B. AP 375 with external omnidirectional antennas
- C. AP 318 with external omnidirectional antennas
- D. AP 365 with integrated omnidirectional antennas
Answer: C
NEW QUESTION # 33
A network architect is creating a new wired design for a warehouse building. As a best practice, what length should the architect allow for the service loop in the wiring closets in this environment?
- A. 15-30 feet (5-10 m)
- B. 3-10 feet (1-3 m)
- C. 30-60 feet (10-20 m)
- D. 3 feet (1 m)
Answer: D
NEW QUESTION # 34
A network architect is redesigning a wireless network. The architect begins by analyzing the number of spatial streams supported by APs of various vendors as well as the wireless devices currently in the network, if the company wants to ensure that new wireless design, including user wireless devices, support Multi-User MIMO (MU-MIMO). which standard or standards must the wireless products support?
- A. Only 802.11ax
- B. Only 802.11ax and 8011.ac
- C. Only 802.11ax,802.11ac, 802.11n, and 802.11a
- D. Only 802.11ax,802.1lac, and 802.l1n
Answer: D
NEW QUESTION # 35
A network architect is replacing an old wireless implementation based on 802.11 a with a new wireless solution. The company has a lot of money invested in legacy wireless barcode scanners and will not be replacing them. However, the bandwidth that the company expects each AP to have less than 700 Mbps in bandwidth, and this is not expected to change in the future.
Which wireless solution would best meet this company's needs and be the most cost-effective?
- A. 802.11ac
- B. 802.11g
- C. 802.11ax
- D. 802.11n
Answer: C
NEW QUESTION # 36
A network architect wants to estimate the number of Aruba APs that will be needed Tor a new wireless design and determine the wireless coverage using VisualRF. The company requires a high-density design. The building has 200.000 square feet. How many APs should the network architect add to VisualRF in order to perform the coverage analysis?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 37
A customer has over 100 access layer switches. The customer requires user authentication done via the Aruba Dynamic Segmentation feature. What components are required to implement this solution? (Select two.)
- A. AirWave server
- B. Active Directory server
- C. Aruba mobility controller
- D. enterpnse authentication server
- E. Aruba APs
Answer: A,C
NEW QUESTION # 38
A network architect will be using VisualRF to determine the appropriate wireless coverage for a new wireless design. Seamless, uninterrupted roaming is necessary for this design, since voice will need to be supported. Given these requirements, which information should be used in VisualRF to plan a cost effective solution that meets these requirements?
- A. Minimum -65db, 1 AP per 2,500 square feet, high density design
- B. Minimum -70db, 1 AP per 2,500 square feet, capacity design
- C. Minimum -70db. 1 AP per 5,000 square feet, high density design
- D. Minimum -80db, 1 AP per 1,000 square feet, very high-density design
Answer: A
NEW QUESTION # 39
A customer placed an order for an ArubaOS 5406R switch and plans to rack mount it in a wiring closet. The dimensions of the switch are 17.5 inches wide (44.45 cm), 6.9 inches high (17.5 cm), and 17.75 inches deep (45.1 cm). How many rack units should a customer plan for this switch?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 40
A customer has a need to track traffic patterns and anomalies on a pair of ArubaOS-CX 8400 series switches. Which technology will the customer need to deploy for these switches?
- A. NetEdit
- B. Network Analysis Engine
- C. 2 CiearPass
- D. Mobility First
Answer: A
NEW QUESTION # 41
......
HP HPE6-A66 Exam, also known as the Aruba Certified Design Associate Exam, is designed for professionals who are looking to gain expertise in designing Aruba network solutions. Aruba Certified Design Associate Exam certification is provided by Hewlett Packard Enterprise, and it is globally recognized as a mark of excellence in the field of networking.
Pass Your HP Exam with HPE6-A66 Exam Dumps: https://testking.guidetorrent.com/HPE6-A66-dumps-questions.html