[Full-Version] 2022 New GuideTorrent 1Z0-1045-20 PDF Recently Updated Questions
1Z0-1045-20 Exam with Guarantee Updated 72 Questions
Oracle 1Z0-1045-20 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
NEW QUESTION 23
While working on the configuration of your client, you uncover that the ASNs will always have the correct serial number information interfaced upfront and your client trusts the ASN information. Your client also needs the serial number information to get into WMS Cloud when the items are received from POs.
Which three actions do you need to take, assuming that item A is serial-tracked? (Choose three.)
- A. Create the IB Container barcode type.
- B. Set the company parameter SERIAL_NUMBER_TRACKING_LEVEL TO 2.
- C. Create the Serial Number barcode type.
- D. Set item A's require serial number parameter to "Required, validate and allow user override".
- E. Set item A's require serial number parameter to "Required, don't Validate".
Answer: A,B,D
NEW QUESTION 24
Your warehouse is divided into two large areas, Area A and Area B, which store different products. You have set up your wave to allocate inventory from only Area A, but when the wave is run, both Area A and area B have allocated items.
What caused the issue?
- A. The locations in Area A have excessive cycle count tasks against them.
- B. Allocation zone was not specified in the task selection criteria.
- C. Allocation zone was not specified in the shipping order.
- D. In the Allocation Mode, "Restrict Allocation Zone" was not specified.
- E. In the Allocation Mode, "Restrict Allocation Zone" was set to Area B.
Answer: B
NEW QUESTION 25
Which two options are true if inventory is unallocated and unavailable? (Choose two.)
- A. Inventory in locations with lock codes
- B. Inventory located in a drop zone
- C. Unlocked inventory located in reserve location
- D. Inventory located in active location
Answer: A,C
NEW QUESTION 26
Your client wants to create an Advanced Shipment Notification (ASN) automatically after a Purchase Order (PO) is created in the system.
What step should they perform?
- A. When interfacing the PO, the "create_asn" check box needs to be selected every time
- B. When interfacing the shipment, the PO number should be specified
- C. Update the Company Parameter CREATE_ASN_FOR_EACH_PO to Yes on the Company Parameter UI screen
- D. The user needs to go to the Purchase Order Screen UI and select the "Create IB Shipment" check box
Answer: C
NEW QUESTION 27
You are the Inventory Control Supervisor at your employer's East Coast facility. Your employer is a 3PL, and your customer is a large company that is also serviced out of the other 3PL facilities. As you start the shift, your Inventory Control team members inform you of a significant change in the RF Cycle Counting process.
Lost IBLPNs are now updates with a "00" lock code rather than the expected "LL" code.
Which scenario is causing this issue?
- A. Your counterpart at the 3PL's other facility changed one of the cycle counting company parameters and that impacted your workflow for that same company.
- B. You dismiss the concern because a change in the lock code has no impact on either the WMS Cloud or host inventories.
- C. One of your inventory team members changed his/her RF parameter default lock code causing the same configuration change to propagate to all users in the facility.
- D. An inventory team member in the other facility marked a lost case with "00" lock code causing all subsequent lost cases to be defaulted to the same code across all LPNs for all company/facility combinations.
- E. While counting LPNs at a location, one of your team members marked a lost case with the new lock code.
The new lock code is stored in system memory and applied to all IBLPNs counted as "Lost".
Answer: E
NEW QUESTION 28
The above diagram shows a typical Third Party Logistics (3PL) structure.
Identify the Facility, Company, and User levels, as applicable, in sequential order (that is, the proper label for box 1 is listed 1st in sequence).
- A. 1=Facility 1, 2=Company 1, 3=Company 2, 4=Super User 1, 5=Facility 2, 6=Facility 3, 7=Facility 4
- B. 1=Super User, 2=Parent 3PL, 3=Company 1, 4=Facility 1, 5-Facility 2, 6=Facility 3, 7=Facility 4
- C. 1=Parent 3PL, 2=Facility 1,3=Facility 2, 4=Company 1, 5=Company 2, 6=Company 3, 7=Company 1
- D. 1=Company 1, 2=Parent 3PL, 3=Company 2, 4=Facility 1, 5=Facility 2, 6=Facility 3, 7=Facility 4
Answer: D
NEW QUESTION 29
Identify three valid statements related to IB Sorting. (Choose three.)
- A. IB Sorting is done before Putaway
- B. IB Sorting can be done by Manual and System driven method
- C. IB Sorting will group SKUs with different Putaway type and build in a single pallet
- D. IB Sorting is done based on Putaway Priority.
- E. IB Sorting is done after Putaway
Answer: B,C,D
NEW QUESTION 30
Select two true statements about Group Configuration. (Choose two.)
- A. User can belong to multiple Groups
- B. Users can assign specific access to activities by using Group permissions
- C. Permissions come already pre-assigned to standard Groups in the system and cannot be changed
- D. Users must log out when switching Groups
- E. Only the RF Menu uses the concept of Groups
Answer: A,B
NEW QUESTION 31
What configuration is needed to create Advance Shipment Notifications for a Transfer Order shipped between two facilities configured in the same WMS Cloud environment?
- A. Set CREATE_ASN_FOR_EACH_PO to YES at Source and Destination Facility levels.
- B. The "ACCEPT TRANSFER SHIPMENT" flag should be enabled on the Facilities UI screen for the Destination Facility.
- C. The "ACCEPT TRANSFER SHIPMENT" flag should be enabled on the Facilities UI screen for the Source Facility.
- D. The Facility parameter key AUTOLOAD_and_SHIP should be set to Yes.
- E. Set CREATE_ASN_FOR_EACH_PO to YES at the Company level.
Answer: B
NEW QUESTION 32
What happens behind the flag Only deallocate on Short in the order type screen?
- A. The Order Type has no impact on the Picking Process.
- B. When the parameter is set to Yes, then only the shorted quantity will get deallocated form the order.
- C. When the parameter is set to Yes, the short pick will cancel the shorted order line automatically and inventory adjustment will be generated for the item.
- D. When the parameter is set to No, the shorted quantity on the order remains in the "allocated" status.
- E. When the parameter is set to YES, during short pick, the system will put the order hold status until more inventory is available.
Answer: C
NEW QUESTION 33
Identify two scenarios in which the user can select the "Release Pick Info" option in the Wave Inquiry UI to generate the wave information for MHE systems. (Choose two.)
- A. if picking has not started for the wave
- B. packed_qty not evaluated when sending Wave Pick Info
- C. after wave picking has started, but some allocations have not been picked yet (allocations having packed_qty=0)
- D. if all the lines are picked (if allocations packed qty=alloc qty) for all the allocations
- E. after wave picking has started for all allocations (alloc_qty>packed_qty, but packed_qty>0)
Answer: C,E
NEW QUESTION 34
Your customer wants to use Advance Shipment Notification (ASN) created in WMS Cloud System for receiving without RF gun and expects ASN to be verified.
What are the two steps to complete the ASN receiving and verification transaction? (Choose two.)
- A. Verify the IB shipment
- B. Create a Blind IB plate number and palletize after receiving
- C. Assign a dock door to IB shipment
- D. Create an ASN from the IB license plate screen
- E. Create a Blind IB plate number and cartonize before receiving
Answer: B,C
NEW QUESTION 35
Your customer wants to store the inventory to Active and Reserve locations after receiving. Inventory is received in cases pack quantity and assigned to an IBLPN. Inventory is categorized to Bin Shelves and Bulk flow items and the items dimensions are available in WMS Cloud.
Which three putaway configurations are required to meet this? (Choose three.)
- A. This is not supported in WMS Cloud.
- B. Locations Size type and Item Putaway item should be configured prior to Putaway
- C. Putaway rule will act according to the Priority defined.
- D. Putaway priority will drive the location selection.
- E. Selection Criteria will evaluate and apply the Putaway priority.
- F. Putaway rule overrides Putaway priority and selects the location based on the item dimension
Answer: B,D,E
NEW QUESTION 36
You are using the WMS Cloud at the Stores as well as the DC. Your workflow at that Store requires that you quickly pick orders for the customer when they arrive.
Which configuration allows you to achieve this workflow requirement?
- A. Create an Order Type with the flag "Allocate during Pick" enabled so that you can pick orders at the store without waving.
- B. Change the Order Type to "Rush" and wave it because the customer is waiting.
- C. Set the Order Type to "Pick Without Wave". This allows the RF options to automatically pick up those order and display to pickers.
- D. Create a Flow Through process and configure each customer's address as a "Designation Location"
- E. Create a wave template with Wave Template Type "Store", then wave will allocate orders in a FiFO sequence.
Answer: A
NEW QUESTION 37
Your customer wants to receive an IB shipment and capture pallet weight at the time of receiving.
Which parameter must be set in the Receiving RF screen to meet this requirement?
- A. Set Mode as Blind-ASN Receiving.
- B. Set rch-sku-not-on-shmnt to "Promt for catch wt".
- C. Set Single-Sku-management as Assume Single SKU.
- D. Set Blind-License Plate Number-receive-mode as by SKU scan.
- E. Set Capture-catch-weight as "Prompt for catch wt".
Answer: A
NEW QUESTION 38
The following configuration is set for the Advance Shipment Notification type: 10% Under Receipt Warning,
10% Over Receipt Warning, and 20% Over Receipt error.
Which two statements match the condition set if the ASN Qty is 100? (Choose two.)
- A. When the Operator receives 89, the RF screen displays an Under Receipt warning message.
- B. When the Operator receives 130 units, the RF screen displays an Over Receipt error message.
- C. When the Operator receives 110, the RF screen displays an Over Receipt warning message.
- D. When the Operator receives 101, the RF screen displays an Over receipt warning message.
- E. When the Operator receives 125 units, the RF screen displays an Over Receipt warning message.
Answer: B,C
NEW QUESTION 39
Your customer wants to Putaway LPN to Location by using the Putaway Rules and link the location with the Replenishment Zone.
Which four configurations are required? (Choose four.)
- A. Putaway Priority and Rules are set at Facility Level.
- B. Putaway Type is set at Facility Level.
- C. Set Criteria for Putaway Rules.
- D. Set Replenishment Zone for Active Location.
- E. Set the Location Size Type at Facility Level.
- F. Set Replenishment Zone for Reserve Location.
Answer: A,B,D,E
NEW QUESTION 40
You are creating a standard report for a client to display LPN Numbers (for multi-SKU LPNs) and their associated items. The two data fields you have in your report are LPN Number and Item Code.
Identify what controls need to be set to create a sub-total for the number of items for each LPN.
- A. Set the Summary Function for LPN to "Total" and check the Group By box for item.
- B. Set the Summary Function for LPN to "Count" and check the Summarize By box for Item.
- C. Set the Summary Function for item to "Count" and check the Summarize By box for LPN.
- D. Set the Summary Function for item to "Total" and check the Group By box for LPN.
Answer: C
NEW QUESTION 41
You have a high demand item in the warehouse that you order from different vendors (e.g. copy paper). Each one of your vendors has its own item number and barcode for the item, and you have your own internal number for the item. You want to process fulfill orders using your internal number.
What should you do in order to accomplish this?
- A. Create a pre-pack item with the original item barcode as the parent and the vendor barcodes as child items.
- B. Manage your workflow to only receive items form one vendor.
- C. Create Alternate Item Codes in the Item Barcode UI to include all of the vendor's item barcodes.
- D. Create a different item in the WMS Cloud master data for each vendor.
- E. Capture the vendor's barcode upon receiving in an inventory attribute, and then scan the inventory attribute during each transaction that requires an item scan.
Answer: C
NEW QUESTION 42
You are the inventory control superuser of a warehouse and need to audit all the cycle count activities done by the operators before they are communicated to the host system from WMS Cloud.
You are responsible for the cycle count functionality configuration of the warehouse as well. This warehouse was newly bought by your company.
Your company is a 3PL and this new warehouse will be used for a new client of your company. Which four tasks do you need to complete? (Choose four.)
- A. Create a Cycle Count RF screen with the parameter auto-approve-mode set to off.
- B. Audit the Pending records in the Cycle Count Adjustment screen.
- C. Set the facility parameter INVN_ADJ_APPROVAL_REQUIRED to yes for the new warehouse.
- D. Set the company parameter INVN_ADJ_APPROVAL_REQUIRED to yes for your company.
- E. Set the company parameter INVN_ADJ_APPROVAL_REQUIRED to yes for the company that you are configuring.
- F. Create a Cycle Count RF screen with the parameter auto-approve-mode set to on.
Answer: B,C,D,F
NEW QUESTION 43
Select the two data formats supported by Oracle WMS Cloud with its built-in interfaces and APIs. (Choose two.)
- A. JSON
- B. Delimited Flat File
- C. XML
- D. pdf
- E. EDI
Answer: B,C
NEW QUESTION 44
Identify two correct statements about ASN creation. (Choose two.)
- A. Oracle WMS Cloud only allows creation of a single ASN from a PO.
- B. The ASN number can be system generated or manually entered.
- C. The ASN number is always auto-generated from a sequence number.
- D. Oracle WMS Cloud allows creation of a single/multiple ASN from a PO.
Answer: B,D
NEW QUESTION 45
A Purchase order created in ERP is downloaded to WMS Cloud.
Which two statements are correct related to the Purchase order update? (Choose two.)
- A. The Purchase order header can be updated by sending an UPDATE action code when the status is in Created and Received.
- B. The RE-CREATE action code if sent for an existing PO, the same PO will be deleted and re-created with the new details.
- C. Purchase order can be re-created by sending the RE-CREATE action code when the status is In- Receiving.
- D. UPDATE is sent in the Header and CREATE in the Detail for an existing Purchase Order line. The application will add up the corresponding "Order Quantity".
- E. UPDATE is sent both in the Header and Detail for an existing line. The application will just update the record at Details.
Answer: A,E
NEW QUESTION 46
Why is it necessary to have a consolidation location?
- A. Packing using a Distribution transaction requires a consolidation location for each store.
- B. It is necessary if you want to consolidate while packing.
- C. After you are finished picking your pick cart, you use a consolidation location to pack.
- D. Consolidation locations are used to consolidate orders for a wave.
Answer: C
NEW QUESTION 47
Select four true statements about System Directed QC. (Choose four.)
- A. The QC process required the use of Purchase Order.
- B. Items are flagged based on the vendor that sent PO and ASN.
- C. For QC to happen, the vendor has to be configured in the system.
- D. Once system directed QC is turned on, all receipts go through QC.
- E. How many SKUs are flagged for QC depends on what is specified in the vendor QC Screen.
Answer: A,C,D,E
NEW QUESTION 48
......
Latest 1Z0-1045-20 Pass Guaranteed Exam Dumps Certification Sample Questions: https://testking.guidetorrent.com/1Z0-1045-20-dumps-questions.html