First Attempt Guaranteed Success in CTS-I Exam 2025
Real CTS-I Exam Questions are the Best Preparation Material
AVIXA CTS-I - Installation Exam Syllabus Topics:
| Topic | Weight |
|---|---|
| Duty A: Conducting Pre-Installation Activities | 20% |
| Task 1: Review Audiovisual Project Documentation | 4% |
| Task 2: Conduct Technical Site Survey | 4% |
| Task 3: Prepare for Audiovisual Installation | 4% |
| Task 4: Evaluate Overall Facility Readiness | 4% |
| Task 5: Conduct On-Site Preparations for Installation | 4% |
| Duty B: Conducting Site Rough-In/First-Fix | 10% |
| Task 1: Deinstallation of Existing Equipment and cabling | 2% |
| Task 2: Mount Substructure | 4% |
| Task 3: Pull Cable | 4% |
| Duty C: Installing Audiovisual Systems | 38% |
| Task 1: Assemble AV Rack | 4% |
| Task 2: Wire the AV Equipment Rack | 5% |
| Task 3: Distribute AV Equipment | 4% |
| Task 4: Mount AV Equipment | 4% |
| Task 5: Terminate Cables | 5% |
| Task 6: Configure Network Properties of Equipment | 4% |
| Task 7: Load Configuration and Control Programs | 4% |
| Task 8: Test the AV System | 4% |
| Task 9: Calibrate the AV System | 4% |
| Duty D: Perform Systems Close Out | 11% |
| Task 1: Demonstrate to Client or Client's Representative that System Performs to Specifications | 4% |
NEW QUESTION # 229
Why is it better to test control systems in the shop?
Select all that apply.
Response:
- A. It allows more time to fix problems.
- B. It prevents customers from asking questions.
- C. It may provide better access to help from internal teams.
- D. It allows time for longer breaks.
Answer: A,C
NEW QUESTION # 230
What does a gain sharing automatic mixer do?
- A. adjusts the volume of a loudspeaker depending on how loud or quiet the person is
- B. adjusts a volume knob in a way pre-programmed by the operator
- C. turns microphone channels on or off automatically
- D. turns up used microphone channels and turns down unused microphone channels
Answer: D
NEW QUESTION # 231
The original LCD monitor specified on the project was not available. The model used to replace it has a lower native resolution than the original monitor. What device could be used to keep the EDID table from now calculating the EDID table to a lower resolution for the whole system?
Response:
- A. EDID emulator
- B. Scaler
- C. Scan Converter
- D. Transcoder
Answer: B
NEW QUESTION # 232
_______ can transmit AV signals and other data up to a distance of 1km (3,280ft) or more before signal quality is compromised.
- A. Unshielded twisted-pair (UTP) cabling
- B. Multimode fiber-optic cabling
- C. Shielded twisted-pair (STP) cabling
- D. Coaxial cabling
Answer: B
NEW QUESTION # 233
What sort of document tells you where and how to install audio components?
- A. Reflected ceiling plans
- B. System flow diagram
- C. Request for Information document
- D. Detail drawings
Answer: B
NEW QUESTION # 234
Which of the following is allowed by a parametric equalizer?
- A. A visual representation of the frequency adjustments
- B. Compatibility with audio mixers or DSP units
- C. Center frequency and bandwidth adjustments
- D. Numerous adjustment points
Answer: C
NEW QUESTION # 235
Which of the following documents should an AV integrator submit in the event that a manufacturer has discontinued a projector model?
- A. Letter of transmittal
- B. Progress report (PR)
- C. Construction change directive (CCD)
- D. Request for change (RFC)
Answer: D
NEW QUESTION # 236
Punch block termination works with _____.
- A. linear compression
- B. insulation displacement
- C. soldering
- D. crimping
Answer: B
NEW QUESTION # 237
LCDs first pass light through a ____, which blocks certain light waves.
- A. polarizer
- B. pixel grid
- C. resistor network
- D. transistor mask
Answer: A
NEW QUESTION # 238
HDCP is capable of working over which of the following interfaces?
Select all that apply.
Response:
- A. DisplayPort
- B. HDMI
- C. HDBaseT
- D. MHL
Answer: A,B,C,D
NEW QUESTION # 239
What type of termination technique is used for a solid conductor RJ45 connector?
Response:
- A. Compression
- B. Crimp
- C. Insulation displacement
- D. Solder
Answer: C
NEW QUESTION # 240
Audio Conferencing equipment makes use of acoustic_____ technology.
- A. doppler
- B. reverberation
- C. echo-cancellation
- D. phase shift
Answer: C
NEW QUESTION # 241
The conversion of energy from one form to another is called _________.
- A. Propagation
- B. Frequency
- C. Transduction
- D. Amplification
Answer: C
NEW QUESTION # 242
What is a best practice when installing cables where there is no conduit for ceiling-mounted projectors?
Response:
- A. Interlacing the cables
- B. Securing the cables with bridle rings mounted to bar joists
- C. Stacking the cables along one side of the ceiling grid
- D. Resting the cables gently on the ceiling tile
Answer: B
NEW QUESTION # 243
A rack unit is equivalent to approximately ____.
- A. 2in (51mm)
- B. 1.75in (44.5mm)
- C. 1.5in (38mm)
- D. 2.25in (57mm)
Answer: B
NEW QUESTION # 244
What are the benefits of using the ANSI/AVIXA 10:2013 Standard for Audiovisual Systems Performance Verification? (Choose all that apply.)
- A. Aligning outcome and performance expectations
- B. Creating reporting that completes the project documentation
- C. Providing a verifiable outcome
- D. Reducing project risk
Answer: A,B,C,D
NEW QUESTION # 245
......
Practice LATEST CTS-I Exam Updated 480 Questions: https://testking.guidetorrent.com/CTS-I-dumps-questions.html