First Attempt Guaranteed Success in 74950X Exam 2022 Real 74950X Exam Questions are the Best Preparation Material NEW QUESTION 23 In on Avaya Surge™ solution, how many ONAs are supported on each HyperSec Gateway? A. 0 B. 1 C. 2 D. 3 Answer: D NEW QUESTION 24 Which Avaya Surge™ tool can be used by administrators to onboard ONAs? A. Device Tunnel B. Application UI C. Network Discovery D. Application [...]

First Attempt Guaranteed Success in 74950X Exam 2022 [Q23-Q48]

Share

First Attempt Guaranteed Success in 74950X Exam 2022

Real 74950X Exam Questions are the Best Preparation Material

NEW QUESTION 23
In on Avaya Surge™ solution, how many ONAs are supported on each HyperSec Gateway?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: D

 

NEW QUESTION 24
Which Avaya Surge™ tool can be used by administrators to onboard ONAs?

  • A. Device Tunnel
  • B. Application UI
  • C. Network Discovery
  • D. Application Access

Answer: D

 

NEW QUESTION 25
Which Avaya Surge™ view can be used to discover network elements such as ONA and other third party network devices?

  • A. Network Topology Access view
  • B. Application Access view
  • C. Device Tunnel view
  • D. Network Discovery view

Answer: C

 

NEW QUESTION 26
When the status of the ONA device state is in the Inactive state, which two tasks should you perform? (Choose two.)

  • A. Insure that the IoT Controller has connectivity to the ONA.
  • B. Insure that the IoT device is connected to the ONA.
  • C. Apply service profile whitelists.
  • D. Check the ONA LED to make sure it is solid green.

Answer: B,C

 

NEW QUESTION 27
What does the term Master Node refer to In the Avaya Surge™ lot Controller deployment model?

  • A. Configure the Avaya Surge™ IoT Controller on the standard node in cluster mode in a single-node setup.
  • B. Configure the Avaya Surge™ IoT Controller on the secondary node in cluster mode in a two-node setup.
  • C. Configure the Avaya Surge™ IoT Controller on the standalone node in cluster mode in a single-node setup-
  • D. Configure the Avaya Surge™ IoT Controller on the primary node in cluster mode in a two-node setup.

Answer: A

 

NEW QUESTION 28
When you see the link state does not contain the link Information in the Avaya Surge™ Application Network topology view, which corrective action will you take?

  • A. Apply service profiles and connect the ONA to the switch.
  • B. Apply the service template and restart the IoT Controller.
  • C. Apply Flow Rules and discover the ONA.
  • D. Apply service profiles and restart the ONA.

Answer: C

 

NEW QUESTION 29
Which database model does an adopted Avaya Surge™ IoT solution use to store all the data points on the main memory database?

  • A. NoSQ
  • B. RDBMS
  • C. MYSQL
  • D. PSSQL

Answer: C

 

NEW QUESTION 30
Avaya Surge™ IoT Controller manages certificates for the ONA onboardlng process.
Which certificate is being used to sign the IoT device certificate?

  • A. ODL Certificate
  • B. Surge Config Certificate
  • C. ROOT CA Certificate
  • D. SDN Engine Certificate

Answer: C

 

NEW QUESTION 31
Which administration view provides a status view of Leader Node, Master Node, and the services that are functioning on each of these servers?

  • A. Device Inventory port-let
  • B. ONA Diagnostics port-let
  • C. Server Status port-let
  • D. Service Availability port-let

Answer: A

 

NEW QUESTION 32
Each ONA follows an ONA Life Cycle Management to describe its states.
When the ONA is in the Active state, which statement is true?

  • A. It is when a device is connected to the network for which the device inventory/profile is not present.
  • B. It is when the device Inventory/profile Is present, and the device is in the network and authenticated, but the service profile is not associated.
  • C. It is when the device Inventory/profile is present and associated to a service profile, and the device is in the network, authenticated, and operational.
  • D. It is when the device Inventory/profile for the device is present, but is not associated to a service profile, and see the ONA is onboarded in the Avaya Surge™ IoT healthcare application.

Answer: B

 

NEW QUESTION 33
When administrators deploy the Avaya Surge™ IoT solution using two EPS switches, in which mode do you need to configure the ERS switch ports?

  • A. UntagPvidOnly
  • B. TagPvidOnly
  • C. TaggedandUntaggall
  • D. Untagandtagall

Answer: C

 

NEW QUESTION 34
To monitor the network elements, which three protocols are used in an Avaya Surge™ IoT solution? (Choose three.)

  • A. Telnet
  • B. Socket
  • C. RDP
  • D. SNMP
  • E. SSH

Answer: A,D,E

 

NEW QUESTION 35
To monitor Avaya Surge™ IoT Controller, which Avaya Surge™ IoT Controller port is used to communicate between ONA and ODL?

  • A. AUX Port
  • B. MGMT Port
  • C. INT Port
  • D. DEV Port

Answer: B

 

NEW QUESTION 36
Which certificate is used by the SDN Engine to create the default certificates during the initial ONA onboarding process?

  • A. ROOT CA Certificate
  • B. Surge Config Certificate
  • C. ODL Certificate
  • D. Avaya Surge Controller

Answer: C

 

NEW QUESTION 37
While implementing an Avaya Surge™ IoT solution, what are the two key recommended configurations it will stop the external hacks/breaches on IoT devices? (Choose two.)

  • A. Segment the entire network
  • B. Implement role firewalls
  • C. Subnet the entire network
  • D. Implement HyperSec zones
  • E. Implement basic firewalls

Answer: B,E

 

NEW QUESTION 38
According to the functionality, which feature describes an Avaya Surge™ IoT Controller?

  • A. It is a centralized SDN based controller that programs ONA devices to easily control traffic from hundreds of IoT devices.
  • B. It is a solution that makes the process of managing devices and monitoring the credential easier for the administrator.
  • C. It is Avaya Switch Management software.
  • D. It is a network provisioning tool that helps map the network topology.

Answer: C

 

NEW QUESTION 39
Once the authentication information for the Hyper-Sec Gateway is provided through the onboarding workflow, when will the HyperSec Gateway be in the Onboarded state?

  • A. When the HyperSec Gateway Is onboarded before discovery
  • B. When HyperSec Gateway is rebooted and rediscovered
  • C. When HyperSec Gateway is onboarded and discovered
  • D. When the HyperSec Gateway is discovered

Answer: C

 

NEW QUESTION 40
An administrator needs an easier solution to manage, secure, and monitor their network elements on a day-to-day basis.
According to the functionality, which statement describes an Avaya Surge™ IoT solution?

  • A. It makes the process of tightly securing and managing thousands of IoT devices.
  • B. It makes the process of managing devices and monitoring the credential easier for the administrator.
  • C. It Hosts a number of virtual machines which makes the traffic flow between devices easier.
  • D. It hosts a series of servers which monitor and keep track of the data.

Answer: B

 

NEW QUESTION 41
Given the description below:
"As you connect and disconnect network devices, your network Is able to automatically extend and retract network configurations." Which Avaya Surge™ IoT feature is described by this description?

  • A. Segmentation
  • B. HyperSec Zoning
  • C. Edge Provisioning
  • D. Elasticity

Answer: B

 

NEW QUESTION 42
Which feature helps customers easily create the secure network segmentation for non-Avaya Fabric customers?

  • A. GRE Tunnels
  • B. HTTPS Tunnels
  • C. SSL-wrapped PPP Tunnels
  • D. IPSec Tunnels

Answer: D

 

NEW QUESTION 43
Which two localization supports have been given to the Avaya Surge™ Application user interface?
(Choose two.)

  • A. German
  • B. French
  • C. Chinese
  • D. Spanish

Answer: A,C

 

NEW QUESTION 44
Which certificate is used to secure the communication between the ODL Controller and ONA?

  • A. Surge Application Certificate
  • B. ODL Certificate
  • C. Surge Config Certificate
  • D. SDN Engine Certificate

Answer: A

 

NEW QUESTION 45
Which Avaya Surge™ view can be used by administrators to see the connections between ONA and ONA HyperSec Gateway concentrators?

  • A. Network Topology Tunnel view
  • B. Application Tunnel view
  • C. Application Access view
  • D. Network Discovery view

Answer: A

 

NEW QUESTION 46
For authentication, which three type of certification do the ONA and Avaya Surge™ IoT Controller share? (Choose three.)

  • A. ONA Device Certificate
  • B. CA Certificate
  • C. Radius Authentication Certificate
  • D. Kerberos Base Authentication Certificate
  • E. IoT Controller Server Certificate

Answer: A,C,D

 

NEW QUESTION 47
When administrators deploy the Avaya Surge™ IoT solution using a single VSP switch, if ONAs are connecting to VSP, in which mode do you need to configure the VSP switch ports?

  • A. UntagPvidOnly
  • B. TagAll
  • C. TaggedandUntagged
  • D. TaggedandUntagged all

Answer: B

 

NEW QUESTION 48
......

Practice LATEST 74950X Exam Updated 65 Questions: https://testking.guidetorrent.com/74950X-dumps-questions.html