Exam Dumps HPE6-A47 Practice Free Latest HP Practice Tests HPE6-A47 Exam Questions | Real HPE6-A47 Practice Dumps NEW QUESTION 30 The customer has an office environment with users who have laptops that can connect with wired or wireless.Users also bring one or two of their own devices. An architect creates a proposal with Aruba AP-325s, 7210Mobility Controllers (MCs), a Mobility Master (MM), and Aruba [...]

Exam Dumps HPE6-A47 Practice Free Latest HP Practice Tests [Q30-Q45]

Share

Exam Dumps HPE6-A47 Practice Free Latest HP Practice Tests

HPE6-A47 Exam Questions | Real HPE6-A47 Practice Dumps

NEW QUESTION 30
The customer has an office environment with users who have laptops that can connect with wired or wireless.
Users also bring one or two of their own devices. An architect creates a proposal with Aruba AP-325s, 7210
Mobility Controllers (MCs), a Mobility Master (MM), and Aruba 2930M switches at the access layer to
support the laptops and APs.
The architect plans to recommend 802.1X authentication without tunnelled node on Aruba 2930M switch ports
that connect to laptops. What is one advantage of this form of authentication?

  • A. provides a second layer of protection for wireless users at the internal perimeter
  • B. prevents users from connection attempts with more than three devices
  • C. enables user access control and ensures only authorized users connect.
  • D. ensures that Aruba firewall policies apply to wired user traffic.

Answer: C

 

NEW QUESTION 31
For which scenario should an architect recommend Aruba Central Managed Portal (MSP)?

  • A. for an enterprise with many branches that needs to manage services centrally
  • B. for a service provider who needs to manage multiple customer networks
  • C. for an enterprise that needs to manage data center services together with the network
  • D. for a service provider who needs to monitor multi-vendor environments

Answer: A

 

NEW QUESTION 32
Refer to the exhibit.

A customer wants to replace the core and aggregation layer of an existing network. Currently the network routes between the aggregation layer and core, and uses the technologies shown in the exhibit.
The customer now wants to route at the core, instead of the aggregation layer, and extend some of the same VLANs in different buildings. However, the customer cannot eliminate the aggregation layer at this point.
What should the architect recommend?

  • A. Combine all switches in the aggregation layer and core into a single backplane stack.
  • B. Implement broadcast filtering on switch-to-switch links across all of the buildings.
  • C. Use VRRP on the core and aggregation switches, with the aggregation switches acting as standby.
  • D. Create a backplane stack at the aggregation layer and a VSF fabric at the core.

Answer: A

 

NEW QUESTION 33
An architect proposes an Aruba wireless solution for a customer that uses Microsoft Skype for Business. What should be set up on the MCs, or MM, to ensure that wireless voice traffic is properly prioritized?

  • A. Voice-aware Layer 3 roaming
  • B. Broadcast suppression combined with AirGroup
  • C. Airtime Fairness set to fair-access
  • D. Firewall policies and SDN to mark voice

Answer: A

 

NEW QUESTION 34
An architect needs to plan 802.11ac wireless deployment for an office environment with a mix of closed offices and cubicles. The coverage area is approximately 4,645 square meters (approximately 50,000 square feet) and has 350 users. The employees use the wireless network for typical office applications, such as email, Web, printing, and accessing shared files and datacenter services.
The architect plans to do a predictive site survey and use VisualRF to plan the coverage. What is a general estimate for the AP count that the architect should have in mind?

  • A. 20-25
  • B. 10-15
  • C. 40-45
  • D. 5-10

Answer: C

 

NEW QUESTION 35
An architect proposes the following Aruba solutions:
1. Two Virtual Mobility Masters (VMMs)
2. Six 7030 Mobility Controllers (MCs)
3. 300 APs
In addition to any necessary AP, PEF, and RFP licenses, which license package should the architect propose?

  • A. one LIC-MC-VA-250 and one LIC-MC-VA-50; six LIC-MM-VA-500
  • B. one LIC-MC-VA-250 and one LIC-MC-VA-50; one LIC-MM-VA-500
  • C. one LIC-MM-VA-500
  • D. six LIC-MM-VA-50

Answer: C

 

NEW QUESTION 36
An architect needs to deliver an upgrade to an 802.11ac-based solution for a customer. The customer requires an active site survey for the new deployment.
Which deliverable should the architect provide to the customer?

  • A. a heat map with sources of RF interface, both 802.11 and non-802.11
  • B. a heat map with existing AP locations and actual tested coverage
  • C. a heat map with proposed AP locations and actual tested coverage
  • D. the heat map with proposed AP locations and predictive coverage

Answer: A

 

NEW QUESTION 37
An architect plant to purpose an Aruba wireless solution with several Mobility Controllers (MCs) and a
Mobility Master (MM) architecture. Wireless users run Skype for Business, a Unified Communications (UC)
solution. The architect plans to use the Aruba SDN capabilities to integrate with the UC solution.
What helps to support high availability specifically for the SDN services?

  • A. a redundant MM
  • B. backup controllers defines on the APs
  • C. a redundant master MC
  • D. a cluster deployment for MCs

Answer: A

 

NEW QUESTION 38
Fast Failover has been implemented between Local 1 and Local 2 separated by Routers. During testing Local1 was disabled and all Campus APs backed up to Local 2 flawlessly. But the RAPs did not, they all failed.
What could be the cause?

  • A. The RAP whitelist must be ported over to Local 2
  • B. RAPs should be configured in their own AP-groups
  • C. A VPN IP Pool must be configured on Local 2
  • D. IPSec must be enabled on Local 2
  • E. RAPs are not supported by Fast Failover

Answer: E

 

NEW QUESTION 39
An architect plans 128 APs to support 12,800 devices in a very high density (VHD) design. The customer
requires high availability, so the architect plans to recommend a pair of controllers. What is one reason to
recommend 7210 controllers rather than 7205 controllers for this deployment?

  • A. the number of devise required
  • B. the need for high speed 10 GbE ports
  • C. the number of APs required
  • D. the need for clustering

Answer: A

 

NEW QUESTION 40
A customer has high security needs, so the network architect proposes dedicated Air Monitors (AMs).
What is one additional benefit of the AMs that the architect can explain?

  • A. The AMs can detect a broad range of RF interference and give administrators help in determining the source.
  • B. If a nearby AP fails, the AM can automatically convert to AP mode to fill in the coverage gap.
  • C. During normal operation, the AMs can support clients, as well as detect and mitigate threats on any channel.
  • D. An AM can help in troubleshooting because it stores detailed statistics about wireless traffic locally.

Answer: B

 

NEW QUESTION 41
Refer to the exhibit.

What is one reason for an architect to recommend the use of Virtual Switching Framework (VSF) in this network?

  • A. VSF transforms switches into virtual extensions of the MCs to simplify MST management.
  • B. VSF enables software-defined network monitoring in conjunction with AirWare.
  • C. VSF enables administrators to manage all 18 switches as a single switch.
  • D. VSF simplifies the topology and eliminates the need for spanning tree.

Answer: D

 

NEW QUESTION 42
An enterprise needs an upgrade to 802.11ac. Users run applications such as Web, email, voice, and video.
The architect needs to conduct an active site survey to plan 802.11ac AP locations. The noise floor is about -90 dBm across the site.
Based on Aruba best practices, what is the minimum acceptable signal that the architect should look for to determine the test AP range?

  • A. a signal of -65 dBm in the 2.4 GHz band
  • B. a signal of -75 dBm in the 2.4 GHz band
  • C. a signal of -65 dBm in the 5 GHz band
  • D. a signal of -75 dBm in the 5 GHz band

Answer: C

Explanation:
Explanation/Reference:

 

NEW QUESTION 43
For which scenario does an Aruba VIA client provide the solution?

  • A. A customer needs an easy-to-use wireless solution that enables remote workers to connect to the same SSID at the corporate office and at home.
  • B. A customer needs a client that will simplify connections to the wireless network at the main site no matter what type of authentication the SSID requires.
  • C. A customer needs to let traveling workers connect to the Internet anywhere and receive secure access to the main site.
  • D. A customer has many telecommuters who take laptops on and offsite and needs a solution to check the security compliance and health of these laptops.

Answer: C

 

NEW QUESTION 44
A customer needs a wireless solution upgrade. Among the devices that need wireless access are printers.
What information about the printers does the architect need to plan the wireless solution? (Select two.)

  • A. whether the printers are physically locked down
  • B. whether the printers support 802.1X
  • C. whether the printers support Power over Ethernet (PoE)
  • D. the 802.11 standards supported by the printer
  • E. the identify of users who need to access printers

Answer: C,D

 

NEW QUESTION 45
......


HP HPE6-A47 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Plan and design an Aruba solution per the customer requirements for a single-site campus environment with less than 1000 employees or subsystems of an enterprise-wide network.
Topic 2
  • Given the customer requirements, determine the component details and document the high-level design
  • choose the appropriate components that should be included on the BOM
Topic 3
  • Given a scenario, evaluate the customer requirements to identify gaps per a gap analysis
  • Given the customer requirements, design the high-level architecture
Topic 4
  • Gather and analyze data, and document customer requirements for a single-site campus environment
  • subsystems of an enterprise-wide network
Topic 5
  • Given a customer scenario, explain how a specific technology or solution would meet the customer requirements
Topic 6
  • Given the customer's requirements, explain and justify the recommended solution
  • design and document the logical and physical network solutions
Topic 7
  • Given a scenario, select the appropriate products based on the customer technical requirements
Topic 8
  • Given a customer scenario, determine and document a detailed network management design
  • design and document a detailed network security solution

 

Verified HPE6-A47 Exam Dumps Q&As - Provide HPE6-A47 with Correct Answers: https://testking.guidetorrent.com/HPE6-A47-dumps-questions.html