[Apr 24, 2026] GuideTorrent VCS-284 dumps & Veritas NetBackup sure practice dumps
Veritas VCS-284 Actual Questions and Braindumps
NEW QUESTION # 171
To support spanning backups in basic disk storage unit groups, what needs to be performed?
Response:
- A. Allow backups to span disks, in the host properties.
- B. Ensure each basic disk storage unit is configured on a separate media server.
- C. Enable unrestricted media sharing, in the host properties.
- D. Configure the storage unit selection: Spanning.
Answer: C
NEW QUESTION # 172
In which order should an administrator perform upgrades to a major release in a NetBackup environment?
Response:
- A. Master Server, Media Server, OpsCenter Server, Clients
- B. OpsCenter Server, Master Server, Media Server, Clients
- C. Master Server, Media Server, Clients, OpsCenter Server
- D. Master Server, OpsCenter Server, Media Server, Clients
Answer: D
NEW QUESTION # 173
A backup image on tape is due to expire in one week. The administrator needs to keep the image available for restore indefinitely. Which two methods can be used to accomplish this goal?
(Select two.)
Response:
- A. use the bpimmedia command to freeze the tape
- B. use the bpduplicate command to create a copy with an infinite retention
- C. use the bpretlevel command to customize the retention level
- D. use the bpexpdate command to change the expiration date of the image
- E. use the vmchange command to change the expiration date of the tape
Answer: A,E
NEW QUESTION # 174
Which feature is compatible with the NBU-Catalog policy type?
Response:
- A. Disable client-side deduplication
- B. Enable granular recovery
- C. Checkpoint restart
- D. Bare Metal Restore
Answer: D
NEW QUESTION # 175
A storage unit group is configured that has disk and then tape listed. During a backup session, jobs start retrying and then running on the tape device only. What is a likely cause of the change?
Response:
- A. The tape device was listed second in the storage unit group.
- B. The disk storage unit is full.
- C. The disk storage unit is staging to tape.
- D. The tape device was listed first in the storage unit group.
Answer: B
NEW QUESTION # 176
An administrator is attempting to configure a new backup policy using synthetic backups. When creating a new full backup schedule, the Synthetic backup option is unable to be selected.
What must the administrator do to the policy to make the Synthetic backup option available for selection?
Response:
- A. select a backup destination that supports synthetic backups
- B. create a full backup schedule with Accelerator forced rescan enabled
- C. create a differential or cumulative incremental backup schedule
- D. enable Collect true image restore information with move detection
Answer: A
NEW QUESTION # 177
An administrator has created a policy that has three new Full schedules as shown in the exhibit. All the schedules are set to run on Friday, from 0200 to 0600. What is the order of priority for the schedules on Friday?
Response:
- A. Full-Quarterly > Full-Weekly > Full-Monthly
- B. Full-Monthly > Full-Weekly > Full-Quarterly
- C. Full-Weekly > Full-Monthly > Full-Quarterly
- D. Full-Quarterly > Full-Monthly > Full-Weekly
Answer: C
NEW QUESTION # 178
Where can an administrator add or list the service providers for cloud storage?
Response:
- A. NetBackup Management > Host Properties > Master Servers > Scalable Storage
- B. NetBackup Management > Host Properties > Master Servers > Cloud Storage
- C. NetBackup Management > Host Properties > Media Servers > Scalable Storage
- D. NetBackup Management > Host Properties > Media Servers > Cloud Storage
Answer: B
NEW QUESTION # 179
What is the maximum age of the host's Certificate Revocation List (CRL) before communication with the host is prevented?
Response:
- A. 30 days
- B. 5 days
- C. 7 days
- D. 48 hours
Answer: C
NEW QUESTION # 180
Which two actions should an administrator perform to ensure NetBackup will successfully erase a tape volume?
Response:
- A. ensure the volume is in the NetBackup Pool.
- B. ensure the volume has been ejected from the library.
- C. ensure the images for the volume have expired.
- D. ensure the volume is unassigned.
- E. ensure the volume has been deleted from inventory.
Answer: D,E
NEW QUESTION # 181
A disk volume is a _____________.
Response:
- A. Logical unit of disk storage
- B. Data Store Pool
- C. Pool of volumes
- D. Collection of media in a volume
Answer: B
NEW QUESTION # 182
Which command should an administrator use to show a list of incomplete copies of lifecycle managed images?
Response:
- A. bpimmedia
- B. nbstl
- C. bpimage
- D. nbstlutil
Answer: D
NEW QUESTION # 183
How can an administrator check deduplication ratios in the NetBackup Administration Console, apart from the Activity Monitor?
Response:
- A. NetBackup Management > Host Properties > Media Servers
- B. NetBackup Management > Storage > Storage Units
- C. Media and Device Management > Credentials > Storage Servers
- D. Media and Device Management > Devices > Disk Pools
Answer: C
NEW QUESTION # 184
What are two possible causes for job failure when a Windows policy is configured to use Accelerator?
(Select two.)
Response:
- A. use of the NTFS Change Journal is disabled
- B. client-side deduplication is disabled
- C. the backup target is AdvancedDisk
- D. the policy lacks a forced rescan schedule
- E. insufficient space in the NetBackup installation directory
Answer: C,E
NEW QUESTION # 185
By default, restores can be initiated by an administrator from the Backup, Archive and Restore interface or by a user on a client machine.
Response:
- A. False
- B. True
Answer: B
NEW QUESTION # 186
Which statement applies to a NetBackup calendar based schedule in a Windows policy type?
Response:
- A. an Exclude date may be configured to occur on an included recurring day of the week
- B. configuring a start window spanning midnight is invalid
- C. the backup may run on a day with a closed backup window with Retries allowed after runday
- D. a calendar based schedule can run twice a day
Answer: A
NEW QUESTION # 187
What should be selected as the source in the BAR console for a restore of individual files backed up using a VMware policy?
Response:
- A. The media server that backed the client up
- B. The identifier for the VM used in the VMware policy
- C. The hostname of the VM
- D. The VMware backup host that performed the backup
Answer: B
NEW QUESTION # 188
An administrator is adding a new Media Server appliance to an existing NetBackup appliance Master Server. What is the correct sequence to configure the new appliance in the NetBackup domain?
Response:
- A. configure the new Media Server, then add the new Media Server to the Master Server in the Web GUI under Manage> Additional Servers
- B. configure the new Media Server, then manually add the new Media Server to the Master Server,s bp.conf
- C. add the new Media Server to the Master Server in the Web GUI under Manage > Additional Servers, then configure the new Media Server
- D. configure the new Media Server, the configuration process automatically adds the new server to the Master Server
Answer: C
NEW QUESTION # 189
A new storage shelf is added to an existing appliance. Which command under Manage > Storage must the administrator perform first after a new shelf is connected to the appliance and the appliance is powered on?
Response:
- A. Scan operation to scan for new storage
- B. Reset operation to reset the storage
- C. Add operation to add a new disk
- D. Resize operation to resize the data partitions
Answer: C
NEW QUESTION # 190
Refer to the exhibit. A backup job configured with a retention level of 2 and Policy volume pool set to the server_tapes is failing due to status code 96: Unable to allocate new media for backup.
See the output of the available_media command below:
Which task in the NetBackup Administration Console should the administrator perform to resolve the status code 96 error?
Response:
- A. Change volume E02003 to the scratch_pool volume pool
- B. Change volume E02004 to the scratch_pool volume pool
- C. Change volume E02002 to the scratch_pool volume pool
- D. Change volume C11201 to the scratch_pool volume pool
Answer: D
NEW QUESTION # 191
Which default RBAC role is unable to provide any job level access to users?
Response:
- A. Default VMware Administrator
- B. Default Cloud Administrator
- C. Default Universal Share Administrator
- D. Default AHV Administrator
Answer: B
NEW QUESTION # 192
Which statement about Microsoft Exchange backups is true in NetBackup?
Response:
- A. The entire Exchange database must be restored as a whole
- B. Exchange must be shut down to be backed up consistently
- C. Individual mail messages can be restored
- D. Individual Exchange mailboxes can be restored, but not individual messages
Answer: C
NEW QUESTION # 193
Which operation compares the contents of an image to the NetBackup catalog?
Response:
- A. Import
- B. Rehydrate
- C. Verify
- D. Duplicate
Answer: D
NEW QUESTION # 194
......
Latest VCS-284 Pass Guaranteed Exam Dumps with Accurate & Updated Questions: https://testking.guidetorrent.com/VCS-284-dumps-questions.html