[2026] Use Valid New E_S4HCON2023 Test Notes & E_S4HCON2023 Valid Exam Guide
E_S4HCON2023 Actual Questions Answers PDF 100% Cover Real Exam Questions
NEW QUESTION # 10
You are performing an SAP S/4HANA conversion. When does the silent data migration (SDM) take place?
- A. During the SUM technical downtime
- B. During the Execution roadmap step
- C. Before the start of the SUM technical downtime
- D. After SUM has ended
Answer: A
NEW QUESTION # 11
During the upgrade of your development system, you run into the adjustment of non-dictionary objects handled by transaction SPAU There you find programs that are shown in status "automatic adjustment (green traffic tight). What will happen with these programs when you continue with your upgrade without performing any other actions inside your SAP system?
- A. SUM refuses to continue unless you have marked a transport request as modification adjustment transport
- B. SUM continues with the next phase and your modifications are lost
- C. SUM continues with the next phase and your modifications are kept as In the start release
- D. Before continuing with the next phase SUM asks for a modification adjustment transport
Answer: C
NEW QUESTION # 12
What do you do to prepare the database migration option of a SUM procedure?
There are 3 correct answers
Response:
- A. Move the stack.xml update file into the download folder
- B. Extract the SAP HANA client installation archive
- C. Extract the SAP HANA database installation archive
- D. Move the R3trans update archive into the download folder
- E. Move the SAPM update archive into the download folder
Answer: A,B,E
NEW QUESTION # 13
What do you need to consider when performing the SI checks for an SAP S/4HANA conversion? There are 2 correct answers to this question.
- A. You need to build up a SI check framework by applying SAP notes.
- B. The SI checks are executed in the development system and the results are transported into the subsequent systems.
- C. Depending on the SAP S/4HANA version, there are different SI check frameworks.
- D. You need an SAP system based on AS ABAP 7.50 or above for the SI check framework.
Answer: A,C
NEW QUESTION # 14
You are performing an SAP S/4HANA conversion of the development system. Which credentials do you use in which system to perform the adjustment of programs and other non-dictionary repository objects (SPAU)?
Please choose the correct answer.
- A. Credentials of user DDIC in the development client of the development system
- B. Credentials of a named user in the development client of the development system
- C. Credentials of user DDIC in client 000 of the shadow system
- D. Credentials of a named user in client 000 of the shadow system
Answer: B
NEW QUESTION # 15
Which additional configuration options are offered by SUM when selecting "Switch expert mode on" in main configuration option "Standard"?
There are 2 correct answers to this question.
Response:
- A. Keep archiving on during the whole procedure.
- B. Choose the instance number of the shadow instance.
- C. Use the Near Zero Downtime Maintenance Technology (NZDM).
- D. Reuse a profile for the shadow instance from a previous run.
Answer: B,D
NEW QUESTION # 16
Which preparational steps must be performed for an SAP S/4HANA conversion?
There are 2 correct answers to this question.
Response:
- A. Uninstall Fiori apps not released for SAP_UI 7.50
- B. Install add-on SAP Gateway 7.50
- C. Uninstall industry extensions not supported by SAP S/4HANA
- D. Delete client 066 (Early Watch Client)
Answer: A,D
NEW QUESTION # 17
In which part of an upgrade does SUM allow you to generate ABAP loads (SGEN)?
There are 2 correct answers to this question.
- A. During uptime
- B. Post-downtime
- C. During downtime
- D. During SPDD
Answer: A,B
NEW QUESTION # 18
You are performing an upgrade of an SAP ECC development system with SUM. What is the earliest point when the upgrade is considered complete and you can allow all dialog users to log on to the system?
Please choose the correct answer.
Response:
- A. During the SUM roadmap step "Postprocessing", after the post procedure steps are complete
- B. After the SUM roadmap step "Postprocessing" and post procedure steps are finished
- C. After the SUM roadmap step "Execution" is finished and before "Postprocessing"
- D. During the SUM roadmap step "Postprocessing", in parallel with post procedure steps
Answer: A
NEW QUESTION # 19
You have selected "Standard" as scenario strategy in the SUM tool. Which steps take place via the shadow instance? Note: There are 2 correct answers to this question.
- A. Modification adjustment (SPAU)
- B. Modification adjustment (SPDD)
- C. Conversion of application tables (PARCONV_UPG)
- D. Activation of dictionary objects (ACT_UPG)
Answer: B,D
NEW QUESTION # 20
You are planning to upgrade your SAP ECC 6.07 system running on a single codepage (SCP) to SAP ECC
6.08. What is the recommended option to perform this upgrade?
Please choose the correct answer.
Response:
- A. Perform the upgrade to SAP ECC 6.08 before the Unicode conversion.
- B. Combine the upgrade and the Unicode conversion using the Twin Upgrade &Unicode Conversion (TU
&UC) procedure. - C. Perform the Unicode conversion before the upgrade to SAP ECC 6.08.
- D. Combine the upgrade and the Unicode conversion using the Combined Upgrade &Unicode Conversion (CU &UC) procedure.
Answer: C
NEW QUESTION # 21
You are using DMO of SUM. You defined 40 parallel R3load processes during uptime and 80 parallel R3load processes during downtime. You have chosen table count verification, but not table contents comparison.
Phase EU_CLONE_MIG_DT_RUN is running. In the Charts Control Center, you can see 40 process buckets being executed in parallel.
Why are 40 Process Buckets executed in parallel?
- A. There are 40 Reload processes used for copying and 40 Reload processes for table count verification.
- B. Without table contents comparison, only 40 R3load processes are being started.
- C. These are 40 pairs of Reload processes, so there are 80 R3load processes running.
- D. SUM is still running in uptime; the 40 defined Reload processes are considered.
Answer: B
NEW QUESTION # 22
You are performing an upgrade with SUM. You are in the BIND_PATCH phase of the roadmap step "Configuration". For some software components you find entries in the "Calculated level" column.
What does the "Calculated level" indicate for those software components?
Please choose the correct answer.
Response:
- A. The SAP Support Packages that will be bound to the upgrade
- B. The SAP Support Packages contained in the upgrade media
- C. The SAP Support packages of the Support Package Stack, calculated by the Maintenance Planner
- D. The SAP Support Packages found in the download directory
Answer: D
NEW QUESTION # 23
What phases of SUM will be executed during an SAP S/4HANA conversion including DMO?
There are 3 correct answers to this question.
Response:
- A. Phases DIFF*
- B. Phases EU_IMPORT*
- C. Phase RUN_RSPTBFIL _ISUTABU
- D. Phase RUN_RSDBSCPY
- E. Phase DOWNCONF_DTTRANS
Answer: A,B,E
NEW QUESTION # 24
You have chosen the "Advanced" option during the main configuration of the SUM tool. Which steps take place via the shadow instance?
There are 2 correct answers to this question.
Response:
- A. Modification adjustment (SPDD)
- B. Switch to new repository (EU_SWITCH)
- C. Conversion of application tables (PARCONV_UPG)
- D. Activation of dictionary objects (ACT_UPG)
Answer: A,D
NEW QUESTION # 25
Which are valid options to check the progress of the database migration in a Microsoft Windows environment?
There is correctanswers to this question.
Response:
- A. Check the "Charts Control Center" in the SUM UI
- B. Check the log files written under "SUM\abap\log"
- C. Check the dump size of the database export on disk
- D. Check logs for jobs starting with "RSUPG_SGEN" in the system
Answer: A,B
NEW QUESTION # 26
You are performing an SAP S/4HANA conversion with the migration repetition option. After which phase does SUM stop to enable a test cycle?
- A. EU_CLONE_MIG_SOT_RUN
- B. EU_IMPORT_ALL
- C. EU_CLONE_MIG_DT_CREATE
- D. EU_CLONE_MIG_DT_RUN
Answer: D
NEW QUESTION # 27
During the configuration of the DMO for SUM, how does the tool behave if option "Do not compare table contents" is selected regarding table comparison?
Please choose the correct answer.
Response:
- A. It performs a comparison of all tables using check sum.
- B. It does NOT perform any table comparison.
- C. It performs a comparison on selected tables using check sum.
- D. It performs a comparison on all tables using row counts.
Answer: D
NEW QUESTION # 28
Which Guides contain information about SUM phases starting with "EU_CLONE_"?
There are 2 correct answers to this question.
Response:
- A. The DMO Guide
- B. The major SUM Guide
- C. The Application Guide
- D. The SAP S/HANA Conversion Guide
Answer: A,D
NEW QUESTION # 29
During the SUM procedure, the phase XPRAS_AIMMRG fails. Where can you most likely see the reason for the error?
There are 2 correct answers to this question.
Response:
- A. In the latest log files in the SUM directory, subdirectory ABAP, subdirectory log
- B. In the latest log files in the SUM directory, subdirectory ABAP, subdirectory tmp
- C. In the job log for the corresponding job in SM37 (Job Overview)
- D. In the corresponding R3trans log files of this phase
Answer: A,C
NEW QUESTION # 30
You are executing as SAP S/4HANA Conversion with scenario strategy Standard. When will the shadow instance be stopped for the last time?
- A. Before the downtime starts
- B. At the end
- C. Early in the downtime
- D. As part of the cleanup process
Answer: B
NEW QUESTION # 31
Which step can be optimized when you provide the MIGRATE_DT_DUR.XML file to SUM?
- A. Silent data migration (SDM)
- B. Shadow on target creation
- C. Downtime conversion
- D. Downtime migration
Answer: D
NEW QUESTION # 32
You want to use the Custom Code Migration Worklist via Remote Code analysis using the ABAP Test Cockpit (ATC). How can you get the latest content of the simplification database? Please choose the correct answer.
- A. Apply the corresponding SAP note via SAP Note Assistant
- B. Download it from SAP Support Portal
- C. Generate it by analyzing the specific custom code via RFC
- D. Configure it within transaction ATC
Answer: B
NEW QUESTION # 33
......
E_S4HCON2023 Exam questions and answers: https://testking.guidetorrent.com/E_S4HCON2023-dumps-questions.html