[2023] Pass HP HPE6-A84 Exam in First Attempt Easily The Most Efficient HPE6-A84 Pdf Dumps For Assured Success HP HPE6-A84 (Aruba Certified Network Security Expert Written) Certification Exam is a valuable certification for individuals looking to advance their careers in network security. Aruba Certified Network Security Expert Written Exam certification validates the skills and knowledge required [...]

All Products Contact now

[2023] Pass HP HPE6-A84 Exam in First Attempt Easily [Q14-Q29]

Share

[2023] Pass HP HPE6-A84 Exam in First Attempt Easily

The Most Efficient HPE6-A84 Pdf Dumps For Assured Success 


HP HPE6-A84 (Aruba Certified Network Security Expert Written) Certification Exam is a valuable certification for individuals looking to advance their careers in network security. Aruba Certified Network Security Expert Written Exam certification validates the skills and knowledge required to design, implement, and manage secure networks using Aruba’s network security solutions and can help individuals stand out in a competitive job market.


HP HPE6-A84 exam is a written exam that is administered online. HPE6-A84 exam is designed to be taken by professionals who have a strong understanding of network security and have experience working with Aruba products and technologies. HPE6-A84 exam is designed to test the knowledge and skills of network security experts and is a valuable certification for professionals who want to advance their careers in this field.

 

NEW QUESTION # 14
What is a common characteristic of a beacon between a compromised device and a command and control server?

  • A. Use of less common protocols such as SNAP
  • B. Periodic transmission of small, identically sized packets
  • C. Use of IPv6 addressing instead of IPv4 addressing
  • D. Lack of encryption

Answer: B


NEW QUESTION # 15
Refer to the exhibit.

Which IP address should you record as a possibly compromised client?

  • A. 10.1.26.151
  • B. 10.254.1.21
  • C. 10.1J.100
  • D. 10.1.26.1

Answer: A

Explanation:
Explanation
The exhibit shows a screenshot of a Malwarebytes alert that indicates that a website was blocked due to compromise. The alert contains the following information:
The type of protection: Web Protection
The website that was blocked: 10.254.1.21
The port that was used: 80
The process that initiated the connection: C:\Program Files
(x86)\Google\Chrome\Application\chrome.exe
The IP address of the device that initiated the connection: 10.1.26.151 The IP address of the device that initiated the connection is the one that should be recorded as a possibly compromised client, as it indicates that the device tried to access a malicious website that could infect it with malware or steal its data. In this case, the IP address of the possibly compromised client is 10.1.26.151.


NEW QUESTION # 16
Refer to the scenario.
# Introduction to the customer
You are helping a company add Aruba ClearPass to their network, which uses Aruba network infrastructure devices.
The company currently has a Windows domain and Windows CA. The Window CA issues certificates to domain computers, domain users, and servers such as domain controllers. An example of a certificate issued by the Windows CA is shown here.


The company is in the process of adding Microsoft Endpoint Manager (Intune) to manage its mobile clients.
The customer is maintaining the on-prem AD for now and uses Azure AD Connect to sync with Azure AD.
# Requirements for issuing certificates to mobile clients
The company wants to use ClearPass Onboard to deploy certificates automatically to mobile clients enrolled in Intune. During this process, Onboard should communicate with Azure AD to validate the clients. High availability should also be provided for this scenario; in other words, clients should be able to get certificates from Subscriber 2 if Subscriber 1 is down.
The Intune admins intend to create certificate profiles that include a UPN SAN with the UPN of the user who enrolled the device.
# Requirements for authenticating clients
The customer requires all types of clients to connect and authenticate on the same corporate SSID.
The company wants CPPM to use these authentication methods:
* EAP-TLS to authenticate users on mobile clients registered in Intune
* TEAR, with EAP-TLS as the inner method to authenticate Windows domain computers and the users on them To succeed, EAP-TLS (standalone or as a TEAP method) clients must meet these requirements:
Their certificate is valid and is not revoked, as validated by OCSP
The client's username matches an account in AD
# Requirements for assigning clients to roles
After authentication, the customer wants the CPPM to assign clients to ClearPass roles based on the following rules:
* Clients with certificates issued by Onboard are assigned the "mobile-onboarded" role
* Clients that have passed TEAP Method 1 are assigned the "domain-computer" role Clients in the AD group "Medical" are assigned the "medical-staff" role Clients in the AD group "Reception" are assigned to the "reception-staff" role The customer requires CPPM to assign authenticated clients to AOS firewall roles as follows:
* Assign medical staff on mobile-onboarded clients to the "medical-mobile" firewall role
* Assign other mobile-onboarded clients to the "mobile-other" firewall role
* Assign medical staff on domain computers to the "medical-domain" firewall role
* All reception staff on domain computers to the "reception-domain" firewall role
* All domain computers with no valid user logged in to the "computer-only" firewall role
* Deny other clients access
# Other requirements
Communications between ClearPass servers and on-prem AD domain controllers must be encrypted.
# Network topology
For the network infrastructure, this customer has Aruba APs and Aruba gateways, which are managed by Central. APs use tunneled WLANs, which tunnel traffic to the gateway cluster. The customer also has AOS-CX switches that are not managed by Central at this point.

# ClearPass cluster IP addressing and hostnames
A customer's ClearPass cluster has these IP addresses:
* Publisher = 10.47.47.5
* Subscriber 1 = 10.47.47.6
* Subscriber 2 = 10.47.47.7
* Virtual IP with Subscriber 1 and Subscriber 2 = 10.47.47.8
The customer's DNS server has these entries
* cp.acnsxtest.com = 10.47.47.5
* cps1.acnsxtest.com = 10.47.47.6
* cps2.acnsxtest.com = 10.47.47.7
* radius.acnsxtest.com = 10.47.47.8
* onboard.acnsxtest.com = 10.47.47.8
You have imported the root certificate for the Windows CA to the ClearPass CA Trust list.
Which usages should you add to it based on the scenario requirements?

  • A. Radsec and Aruba infrastructure
  • B. EAP and Radsec
  • C. EAP and AD/LDAP Server
  • D. LDAP and Aruba infrastructure

Answer: C


NEW QUESTION # 17
Refer to the scenario.
# Introduction to the customer
You are helping a company add Aruba ClearPass to their network, which uses Aruba network infrastructure devices.
The company currently has a Windows domain and Windows CA. The Window CA issues certificates to domain computers, domain users, and servers such as domain controllers. An example of a certificate issued by the Windows CA is shown here.


The company is in the process of adding Microsoft Endpoint Manager (Intune) to manage its mobile clients.
The customer is maintaining the on-prem AD for now and uses Azure AD Connect to sync with Azure AD.
# Requirements for issuing certificates to mobile clients
The company wants to use ClearPass Onboard to deploy certificates automatically to mobile clients enrolled in Intune. During this process, Onboard should communicate with Azure AD to validate the clients. High availability should also be provided for this scenario; in other words, clients should be able to get certificates from Subscriber 2 if Subscriber 1 is down.
The Intune admins intend to create certificate profiles that include a UPN SAN with the UPN of the user who enrolled the device.
# Requirements for authenticating clients
The customer requires all types of clients to connect and authenticate on the same corporate SSID.
The company wants CPPM to use these authentication methods:
EAP-TLS to authenticate users on mobile clients registered in Intune
TEAR, with EAP-TLS as the inner method to authenticate Windows domain computers and the users on them To succeed, EAP-TLS (standalone or as a TEAP method) clients must meet these requirements:
Their certificate is valid and is not revoked, as validated by OCSP
The client's username matches an account in AD
# Requirements for assigning clients to roles
After authentication, the customer wants the CPPM to assign clients to ClearPass roles based on the following rules:
Clients with certificates issued by Onboard are assigned the "mobile-onboarded" role Clients that have passed TEAP Method 1 are assigned the "domain-computer" role Clients in the AD group "Medical" are assigned the "medical-staff" role Clients in the AD group "Reception" are assigned to the "reception-staff" role The customer requires CPPM to assign authenticated clients to AOS firewall roles as follows:
Assign medical staff on mobile-onboarded clients to the "medical-mobile" firewall role Assign other mobile-onboarded clients to the "mobile-other" firewall role Assign medical staff on domain computers to the "medical-domain" firewall role All reception staff on domain computers to the "reception-domain" firewall role All domain computers with no valid user logged in to the "computer-only" firewall role Deny other clients access
# Other requirements
Communications between ClearPass servers and on-prem AD domain controllers must be encrypted.
# Network topology
For the network infrastructure, this customer has Aruba APs and Aruba gateways, which are managed by Central. APs use tunneled WLANs, which tunnel traffic to the gateway cluster. The customer also has AOS-CX switches that are not managed by Central at this point.

# ClearPass cluster IP addressing and hostnames
A customer's ClearPass cluster has these IP addresses:
Publisher = 10.47.47.5
Subscriber 1 = 10.47.47.6
Subscriber 2 = 10.47.47.7
Virtual IP with Subscriber 1 and Subscriber 2 = 10.47.47.8
The customer's DNS server has these entries
cp.acnsxtest.com = 10.47.47.5
cps1.acnsxtest.com = 10.47.47.6
cps2.acnsxtest.com = 10.47.47.7
radius.acnsxtest.com = 10.47.47.8
onboard.acnsxtest.com = 10.47.47.8
You have started to create a CA to meet the customer's requirements for issuing certificates to mobile clients, as shown in the exhibit below.

What change will help to meet those requirements and the requirements for authenticating clients?

  • A. Change the EST authentication method to use an external validator.
  • B. Change the EST Digest Algorithm to SHA-512.
  • C. Specify an OCSP responder, setting the hostname to localhost.
  • D. Recreate the CA as a registration authority under Azure AD.

Answer: A


NEW QUESTION # 18
You are working with a developer to design a custom NAE script for a customer. The NAE agent should trigger an alert when ARP inspection drops packets on a VLAN. The customer wants the admins to be able to select the correct VLAN ID for the agent to monitor when they create the agent.
What should you tell the developer to do?

  • A. Create multiple monitors within the script from which admins can select when they create the agent.
  • B. Define a VLAN ID parameter; reference that parameter when defining the monitor URI.
  • C. Use a callback action to collect the ID of the VLAN on which admins have enabled NAE monitoring.
  • D. Use this variable, %{vlan-id} when defining the monitor URI in the NAE agent script.

Answer: B


NEW QUESTION # 19
A customer requires a secure solution for connecting remote users to the corporate main site. You are designing a client-to-site virtual private network (VPN) based on Aruba VIA and Aruba MobilityControllers acting as VPN Concentrators (VPNCs). Remote users will first use the VIA client to contact the VPNCs and obtain connection settings.
The users should only be allowed to receive the settings if they are the customer's "RemoteEmployees" AD group. After receiving the settings, the VIA clients will automatically establish VPN connections, authenticating to CPPM with certificates.
What should you do to help ensure that only authorized users obtain VIA connection settings?

  • A. Set up the VPNCs' VIA web authentication profile to use an AD domain controller as the LDAP server.
  • B. Set up the VPNCs' VIA connection profile to use one authentication profile, which is set to the AD domain controller's hostname.
  • C. Set up the VPNCs' VIA connection profile to use two authentication profiles, one RADIUS profile to CPPM and one LDAP profile to AD.
  • D. Set up the VPNCs' VIA web authentication profile to use CPPM as the authentication server; set up a service on CPPM that uses AD as the authentication source.

Answer: D


NEW QUESTION # 20
Refer to the scenario.
A customer is migrating from on-prem AD to Azure AD as its sole domain solution. The customer also manages both wired and wireless devices with Microsoft Endpoint Manager (Intune).
The customer wants to improve security for the network edge. You are helping the customer design a ClearPass deployment for this purpose. Aruba network devices will authenticate wireless and wired clients to an Aruba ClearPass Policy Manager (CPPM) cluster (which uses version 6.10).
The customer has several requirements for authentication. The clients should only pass EAP-TLS authentication if a query to Azure AD shows that they have accounts in Azure AD. To further refine the clients' privileges, ClearPass also should use information collected by Intune to make access control decisions.
You are planning to use Azure AD as the authentication source in 802.1X services.
What should you make sure that the customer understands is required?

  • A. Azure AD Domain Services
  • B. CPPM's RADIUS certificate was imported as trusted in the Azure AD directory
  • C. Windows 365 subscriptions
  • D. An app registration on Azure AD that references the CPPM's FQDN

Answer: D


NEW QUESTION # 21
You are designing an Aruba ClearPass Policy Manager (CPPM) solution for a customer. You learn that the customer has a Palo Alto firewall that filters traffic between clients in the campus and the data center.
Which integration can you suggest?

  • A. Establishing a double layer of authentication at both the campus edge and the data center DMZ
  • B. Sending Syslogs from the firewall to CPPM to signal CPPM to change the authentication status for misbehaving clients
  • C. Importing the firewall's rules to program downloadable user roles for AOS-CX switches more quickly
  • D. Importing clients' MAC addresses to configure known clients for MAC authentication more quickly

Answer: B

Explanation:
Explanation
This option allows CPPM to receive real-time information about the network activity and security posture of the clients from the firewall, and then apply appropriate enforcement actions based on the configured policies 12. For example, if a client is detected to be infected with malware or violating the network usage policy, CPPM can quarantine or disconnect the client from the network 2.


NEW QUESTION # 22
Refer to the scenario.
A customer has an Aruba ClearPass cluster. The customer has AOS-CX switches that implement 802.1X authentication to ClearPass Policy Manager (CPPM).
Switches are using local port-access policies.
The customer wants to start tunneling wired clients that pass user authentication only to an Aruba gateway cluster. The gateway cluster should assign these clients to the "eth-internet" role. The gateway should also handle assigning clients to their VLAN, which is VLAN 20.
The plan for the enforcement policy and profiles is shown below:

The gateway cluster has two gateways with these IP addresses:
* Gateway 1
o VLAN 4085 (system IP) = 10.20.4.21
o VLAN 20 (users) = 10.20.20.1
o VLAN 4094 (WAN) = 198.51.100.14
* Gateway 2
o VLAN 4085 (system IP) = 10.20.4.22
o VLAN 20 (users) = 10.20.20.2
o VLAN 4094 (WAN) = 198.51.100.12
* VRRP on VLAN 20 = 10.20.20.254
The customer requires high availability for the tunnels between the switches and the gateway cluster. If one gateway falls, the other gateway should take over its tunnels. Also, the switch should be able to discover the gateway cluster regardless of whether one of the gateways is in the cluster.
Assume that you are using the "myzone" name for the UBT zone.
Which is a valid minimal configuration for the AOS-CX port-access roles?

  • A. port-access role eth-internet gateway-zone zone myzone gateway-role eth-internet vlan access 20
  • B. port-access role internet-only gateway-zone zone myzone gateway-role eth-internet
  • C. port-access role eth-internet gateway-zone zone myzone gateway-role eth-user
  • D. port-access role internet-only gateway-zone zone myzone gateway-role eth-internet vlan access 20

Answer: B


NEW QUESTION # 23
A company has an Aruba ClearPass server at 10.47.47.8, FQDN radius.acnsxtest.local. This exhibit shows ClearPass Policy Manager's (CPPM's) settings for an Aruba Mobility Controller (MC).

The MC is already configured with RADIUS authentication settings for CPPM, and RADIUS requests between the MC and CPPM are working. A network admin enters and commits this command to enable dynamic authorization on the MC:
aaa rfc-3576-server 10.47.47.8
But when CPPM sends CoA requests to the MC, they are not working. This exhibit shows the RFC 3576 server statistics on the MC:

How could you fix this issue?

  • A. Make sure that CPPM is using an ArubaOS Wireless RADIUS CoA enforcement profile.
  • B. Configure the MC to obtain the time from a valid NTP server.
  • C. Enable RadSec on the MCs' RFC 3676 server config.
  • D. Change the UDP port in the MCs' RFC 3576 server config to 3799.

Answer: D

Explanation:
Explanation
Dynamic authorization is a feature that allows CPPM to send change of authorization (CoA) or disconnect messages to the MC to modify or terminate a user session based on certain conditions or events 1. Dynamic authorization uses the RFC 3576 protocol, which is an extension of the RADIUS protocol 2.
To enable dynamic authorization on the MC, you need to configure the IP address and UDP port of the CPPM server as the RFC 3576 server on the MC 3. The default UDP port for RFC 3576 is 3799, but it can be changed on the CPPM server . The MC and CPPM must use the same UDP port for dynamic authorization to work properly 3.
In this scenario, the MC is configured with the IP address of the CPPM server (10.47.47.8) as the RFC 3576 server, but it is using the default UDP port of 3799. However, according to the exhibit, the CPPM server is using a different UDP port of 1700 for dynamic authorization . This mismatch causes the CoA requests from CPPM to fail on the MC, as shown by the statistics .
To fix this issue, you need to change the UDP port in the MCs' RFC 3576 server config to match the UDP port used by CPPM, which is 1700 in this case. Alternatively, you can change the UDP port in CPPM to match the default UDP port of 3799 on the MC. Either way, you need to ensure that both devices use the same UDP port for dynamic authorization 3 .


NEW QUESTION # 24
Refer to the scenario.
A customer has asked you to review their AOS-CX switches for potential vulnerabilities. The configuration for these switches is shown below:

What is one immediate remediation that you should recommend?

  • A. Either disabling DHCPv4-snoopinq or leaving it enabled, but also enabling ARP inspection
  • B. Changing the switch's DNS server to the mgmt VRF
  • C. Disabling Telnet
  • D. Setting the clock manually instead of using NTP

Answer: C

Explanation:
Explanation
According to the AOS-CX Switches Multiple Vulnerabilities1, one of the vulnerabilities (CVE-2021-41001) affects the Telnet service on AOS-CX switches. This vulnerability allows an unauthenticated remote attacker to cause a denial-of-service condition on the switch by sending specially crafted Telnet packets. The impact of this vulnerability is high, as it could result in a loss of management access and network disruption. Therefore, one immediate remediation that you should recommend is to disable Telnet on the switch. This way, the switch can prevent any malicious Telnet traffic from reaching it and avoid the exploitation of this vulnerability.


NEW QUESTION # 25
Refer to the scenario.
# Introduction to the customer
You are helping a company add Aruba ClearPass to their network, which uses Aruba network infrastructure devices.
The company currently has a Windows domain and Windows CA. The Window CA issues certificates to domain computers, domain users, and servers such as domain controllers. An example of a certificate issued by the Windows CA is shown here.


The company is in the process of adding Microsoft Endpoint Manager (Intune) to manage its mobile clients.
The customer is maintaining the on-prem AD for now and uses Azure AD Connect to sync with Azure AD.
# Requirements for issuing certificates to mobile clients
The company wants to use ClearPass Onboard to deploy certificates automatically to mobile clients enrolled in Intune. During this process, Onboard should communicate with Azure AD to validate the clients. High availability should also be provided for this scenario; in other words, clients should be able to get certificates from Subscriber 2 if Subscriber 1 is down.
The Intune admins intend to create certificate profiles that include a UPN SAN with the UPN of the user who enrolled the device.
# Requirements for authenticating clients
The customer requires all types of clients to connect and authenticate on the same corporate SSID.
The company wants CPPM to use these authentication methods:
EAP-TLS to authenticate users on mobile clients registered in Intune
TEAR, with EAP-TLS as the inner method to authenticate Windows domain computers and the users on them To succeed, EAP-TLS (standalone or as a TEAP method) clients must meet these requirements:
Their certificate is valid and is not revoked, as validated by OCSP
The client's username matches an account in AD
# Requirements for assigning clients to roles
After authentication, the customer wants the CPPM to assign clients to ClearPass roles based on the following rules:
Clients with certificates issued by Onboard are assigned the "mobile-onboarded" role Clients that have passed TEAP Method 1 are assigned the "domain-computer" role Clients in the AD group "Medical" are assigned the "medical-staff" role Clients in the AD group "Reception" are assigned to the "reception-staff" role The customer requires CPPM to assign authenticated clients to AOS firewall roles as follows:
Assign medical staff on mobile-onboarded clients to the "medical-mobile" firewall role Assign other mobile-onboarded clients to the "mobile-other" firewall role Assign medical staff on domain computers to the "medical-domain" firewall role All reception staff on domain computers to the "reception-domain" firewall role All domain computers with no valid user logged in to the "computer-only" firewall role Deny other clients access
# Other requirements
Communications between ClearPass servers and on-prem AD domain controllers must be encrypted.
# Network topology
For the network infrastructure, this customer has Aruba APs and Aruba gateways, which are managed by Central. APs use tunneled WLANs, which tunnel traffic to the gateway cluster. The customer also has AOS-CX switches that are not managed by Central at this point.

# ClearPass cluster IP addressing and hostnames
A customer's ClearPass cluster has these IP addresses:
Publisher = 10.47.47.5
Subscriber 1 = 10.47.47.6
Subscriber 2 = 10.47.47.7
Virtual IP with Subscriber 1 and Subscriber 2 = 10.47.47.8
The customer's DNS server has these entries
cp.acnsxtest.com = 10.47.47.5
cps1.acnsxtest.com = 10.47.47.6
cps2.acnsxtest.com = 10.47.47.7
radius.acnsxtest.com = 10.47.47.8
onboard.acnsxtest.com = 10.47.47.8
The customer has now decided that it needs CPPM to assign certain mobile-onboarded devices to a
"nurse-call" AOS user role. These are mobile-onboarded devices that are communicating with IP address
10.1.18.12 using port 4343.
What are the prerequisites for fulfilling this requirement?

  • A. Creating server-based role assignment rules on gateways that apply roles to clients based on traffic destinations
  • B. Creating server-based role assignment rules on APs that apply roles to clients based on traffic destinations
  • C. Setting up traffic classes and role mapping rules within Central's global settings
  • D. Creating a tag on Central to select the proper destination connection and integrating CPPM with Device Insight

Answer: A


NEW QUESTION # 26
Refer to the scenario.
A customer is using an AOS 10 architecture with Aruba APs and Aruba gateways (two per site). Admins have implemented auto-site clustering for gateways with the default gateway mode disabled. WLANs use tunneled mode to the gateways.
The WLAN security is WPA3-Enterprise with authentication to an Aruba ClearPass Policy Manager (CPPM) cluster VIP. RADIUS communications use RADIUS, not RadSec.
For which devices does CPPM require network device entries?

  • A. ForAP clusters'virtual IP addresses
  • B. For APs' actual IP addresses
  • C. For gateways' actual IP addresses and AP clusters' virtual IP addresses for dynamic authorization
  • D. Forgateways' actual IP addresses and dynamic authorization VRRP addresses

Answer: D

Explanation:
Explanation
ClearPass Policy Manager (CPPM) requires network device entries for the devices that communicate with it using RADIUS or TACACS+ protocols. In this scenario, the gateways are the devices that act as RADIUS clients and send authentication requests to CPPM for the WLAN users. Therefore, CPPM needs to have network device entries for the gateways' actual IP addresses and the shared secrets that match the ones configured on the gateways.
Additionally, CPPM also requires network device entries for the gateways' dynamic authorization VRRP addresses, which are used for sending CoA messages to the gateways. CoA messages are used to change the attributes or status of a user session on the gateways without requiring re-authentication. For example, CPPM can use CoA to apply policies, roles, or bandwidth limits based on various conditions. To enable VRRP IP addresses for dynamic authorization, you need to set up gateway clusters manually and assign a VRRP VLAN and a VRRP IP address to each cluster. This way, CPPM can use the VRRP IP address as the NAS IP address for RADIUS communications and CoA messages. The VRRP IP address will remain the same even if the active gateway in the cluster changes due to a failover event, ensuring seamless operations.


NEW QUESTION # 27
Refer to the scenario.
This customer is enforcing 802.1X on AOS-CX switches to Aruba ClearPass Policy Manager (CPPM). The customer wants switches to download role settings from CPPM. The "reception-domain" role must have these settings:
- Assigns clients to VLAN 14 on switch 1, VLAN 24 on switch 2, and so on.
- Filters client traffic as follows:
- Clients are permitted full access to 10.1.5.0/24 and the Internet
- Clients are denied access to 10.1.0.0/16
The switch topology is shown here:

How should you configure the VLAN setting for the reception role?

  • A. Configure the enforcement profile as a downloadable role, but specify only the role name and leave the VLAN undefined. Then define a 'reception' role with the correct VLAN setting on each individual access layer switch.
  • B. Assign a number-based ID to the access layer switches. Then use this variable in the enforcement profile VLAN settings: %(NAS-ID]4.
  • C. Assign a consistent name to VLAN 14, 24, or 34 on each access layer switch and reference that name in the enforcement profile VLAN settings.
  • D. Create a separate enforcement profile with a different VLAN ID for each switch. Add all profiles to the profile list in the appropriate enforcement policy rule.

Answer: C

Explanation:
Explanation
According to the AOS-CX User Guide, one way to configure the VLAN setting for the reception role is to assign a consistent name to VLAN 14, 24, or 34 on each access layer switch and reference that name in the enforcement profile VLAN settings. This way, the switches can download the role settings from CPPM and apply the correct VLAN based on the name, rather than the ID. For example, the enforcement profile VLAN settings could be:

And the VLAN configuration on each switch could be:


NEW QUESTION # 28
A customer has an AOS 10 architecture, consisting of Aruba AP and AOS-CX switches, managed by Aruba Central. The customer wants to obtain information about the clients, such as their general category and OS.
What should you explain?

  • A. You will need to set up Aruba Central as a secondary IP helper for client VLANs, but this will not interfere with existing operations.
  • B. The customer should set up a dedicated switch VSX group to sniff packets and direct them to Aruba Central.
  • C. Aruba Central will automatically derive this information using telemetry from the Aruba devices.
  • D. The customer must deploy Aruba gateways in order to receive any client profiling information.

Answer: C

Explanation:
Explanation
Aruba Central can provide visibility and profiling of clients using the Client Insights feature, which is an AI-powered solution that uses native infrastructure telemetry to identify and classify clients based on their OS and general category. This feature does not require any additional hardware or software, such as gateways, IP helpers, or packet sniffers. It works by collecting and analyzing data from the Aruba APs and AOS-CX switches that are managed by Aruba Central. You can find more information about Client Insights in the Visibility and profiling solutions | HPE Aruba Networking page and the Clients Profile - Aruba page.


NEW QUESTION # 29
......

We offers you the latest free online HPE6-A84 dumps to practice: https://testking.guidetorrent.com/HPE6-A84-dumps-questions.html

Related Articles

more
HP HPE6-A84 Certification Practice Exam